insulation jacketing tape aluminum

Pipe anti-corrosion and anti-rust insulation jacketing tape aluminum, commonly known as "stainless anti-corrosion aluminum jacketing", is widely used in power plant desulfurization flue insulation, gas, chemical plants, oil fields, petrochemicals, nuclear power plants and so on.


 
First of all, the density of the pipeline anti-corrosion and anti-rust insulation jacketing tape aluminum is only 2.73 g/cm3, and the density of iron reaches 7.8g/cm3. Therefore, the weight of the anti-rust insulation jacketing tape aluminum per square pipe is less than 1/3 of that of stainless steel. It can reduce the cost of the enterprise well and reduce the pressure of the bracket. Secondly, because the surface of the pipeline anti-corrosion and anti-rust insulation jacketing tape aluminum is not easy to be corroded due to the dense oxide protective film, it has a good anti-rust effect. In the bad environment, rain, sun exposure, and heavy snow have almost no damage to the pipeline anti-corrosion and anti-rust insulation jacketing tape aluminum. It is not like the iron sheet, and it will rust quickly after seeing the rain. It can be seen from the above two points that the pipeline anti-corrosion and anti-rust insulation jacketing tape aluminum can completely replace the stainless steel material to a large extent, and the cost is lower, which is the material of choice for the construction industry. At present, after nearly 20 years of experience in pipeline insulation in China, it has been proved that there is no rust and decay in the anti-corrosion and anti-rust insulation jacketing tape aluminum. However, the use of iron for protection and insulation has been replaced several times.
 
Pipe anti-corrosion and anti-rust insulation jacketing tape aluminum is one of the featured products of Signi AluminIum. The chemical composition is stable. According to the user's requirements, the main component manganese (Mn) is controlled between 1.0 and 1.6%, and the copper content is controlled at ≤0.20%. National standard, the performance tensile strength is controlled at 145-195MPa, the elongation is ≥4%, the thickness is 0.3-1.0mm, the width is 1.0m or 1.2m, and the pipeline anti-corrosion insulation with different thickness, width and length can also be customized according to customer requirements. Anti-rust insulation jacketing tape aluminum