How to clean insulation aluminum jacketing

At present, many local insulation aluminum jacketing are used. Some irregular thermal insulation aluminum jacketing manufacturers may have some stains on the insulation aluminum jacketing due to weather, traffic and other external reasons when transporting products. How should users clean these stains when using insulation aluminum jacketing?


 
1. Relevant operators shall first wash the surface of the plate with a lot of water to clean the dirt and dust on the surface.
 
2. Choose the cleaner that meets the standard on the market, dilute it with some water, and then gently wipe the board surface with soft and clean cloth to remove some stubborn stains on the insulation aluminum jacketing.
 
3. The thermal insulation aluminum jacketing manufacturer suggests that at this time, a lot of clean water should be used to wash the thermal insulation aluminum jacketing again, so that the dirt can be washed away.
 
4. Carefully check the insulation aluminum jacketing to see if there is any unclean place. The parts that have not been cleaned can be treated in combination with the diluted detergent.
 
5. At this time, use a lot of water to wash again until all the detergents are washed away. In fact, the presence of stains on the insulation aluminum jacketing is not necessarily caused by the transportation of the insulation aluminum jacketing manufacturer, but may also be caused by the improper storage of the user. Therefore, we should also learn the correct storage method of the insulation aluminum jacketing.
 
More and more decorative insulation aluminum jacketing appear in people's lives in the market. The surface treatment of insulation aluminum jacketing can improve the decorative, corrosive and functional use of products. As a professional thermal insulation aluminum jacketing manufacturer, we have advanced production technology and profound understanding of insulation aluminum jacketing.
 
1. For pretreatment, the surface shall be cleaned by using methods. Physical and chemical methods can be used. The most important thing is to expose the thermal insulation aluminum jacketing to the substrate. This is conducive to the complete oxidation, and the formed oxide film will also be dense. Some mechanical equipment can also be used for pretreatment.
 
2. Anodizing: after the heat preservation and heat preservation aluminum sheet is treated, the matrix undergoes anodizing reaction, and then dense oxide film will be formed.
 
3. Sealing: after anodic oxidation, many membrane holes will appear on the oxide film. Sealing is to seal these membrane holes to prevent the oxide film from being polluted. This oxide film is transparent and adsorptive, so some metal salts will be deposited in the pores, so that some original silver white or many other colors can be revealed on the surface. Through these steps, we can understand that the thermal insulation aluminum skin is colored through these processes, making our buildings more colorful.